4,7/5
Dry Diamond Drill Bit for Tile, Marble & Glass – No Water Needed
Drill Clean Holes in Tile Without Cracks, Chips, or a Water Mess
This dry-running diamond bit lets you drill, grind, and shape porcelain tile, marble, glass, and granite — without soaking your bathroom or shattering an expensive tile on the last hole of the job. The vacuum-brazed diamond grit bites instantly on contact, and the standard 1/4-inch hex shank fits any drill, impact driver, or rotary tool you already have on hand.
Stop Cracking Tiles on the Last Hole of the Job
You mark four spots for a towel bar. Three drill clean. The fourth chips at the edge and a hairline crack runs across the surface. Regular masonry bits slip across porcelain glaze. Budget diamond hole saws need a constant drip of water to avoid overheating — and running a hose through a finished bathroom for one bracket isn't realistic. This bit grabs the surface the instant it touches and stays cool while dry.
➤ Bites Instantly, No Pilot Hole Required: Vacuum-brazed diamond grit grips the surface as soon as the bit meets glaze. Mark the spot, pull the trigger, drillno slipping, no spider cracks, no taping off the area beforehand.
➤ Runs Dry, No Water Tray Needed: The exposed-grit tip vents heat through its open surface, letting you drill a wall-mounted shower bracket without plastic sheeting or a coolant line.
➤ Fits Any Drill You Already Have: The standard 1/4-inch hex shank loads into cordless drills, impact drivers, and rotary tools just like a screwdriver bit. No SDS adapter, no chuck key, no special collet required.
Built for Hex-Shank Drills, Not Industrial Wet Rigs
Most diamond core bits are designed for masonry rigs that flood the cut area with water. This bit uses vacuum-brazed grit — diamond particles fused to the steel tip at high heat so they stand proud of the surface and stay sharp far longer than the electroplated bits found in cheap hole-saw kits. The exposed grit cuts faster, clears debris through its open texture, and stays cool enough for dry use on typical jobs.
The 1/4-inch hex shank locks into the same chuck or quick-change holder used for screwdriver bits. Drill a hole, swap to a Phillips bit, drive the screw, then switch back — no wobbling loose mid-cut, no special adapter, no extra tool needed.
Why DIYers Are Skipping the Wet-Saw Setup
We strive to make the ordering and delivery process as simple and seamless as possible.
Once your order has been shipped, you will receive tracking information so you can follow your package throughout its journey.
If you are not completely satisfied with your purchase, you can return your order within 14 days of receiving it, subject to our return policy.
To place an order, simply add your desired products to your cart and follow the steps at checkout. Please make sure to carefully review your shipping and contact details before completing your purchase.
We offer free shipping on all orders, with no additional shipping costs at checkout.
All payments are processed through a secure, SSL-encrypted payment environment. We offer a selection of trusted payment methods, which may vary depending on your location.
If you have any questions about your order, payment, delivery, or return, our customer service team is happy to assist you.
